Item
8. Louver control
This function controls the air direction of the indoor unit.
1) Louver
• The position is automatically controlled according to the operation
position
mode (COOL/HEAT).
• The set louver position is stored in memory by the microcomputer,
and the louver returns to the stored position when the next operation
is performed. (Cooling/heating memory position)
The angle of the louver is indicated as the louver closes fully is 0°.
1) Louver position in cooling operation
2) Louver position in heating operation
2) Air direction adjustment
Horizontal
blowing
•
3) Swing
Swing oper
the center
•
If the swing range
swing operation is performed in range 35° from the limit.
Operation flow and applicable data, etc.
Cooling operation/
AUTO (COOL)
Initial setting of "Cooling storage position"
Louver : Horizontal blowing (37.4°)
Heating operation/
AUTO (HEAT)
Initial setting of "Heating storage position"
Louver : Directs downward (76.9°)
Air direction
Inclined
Blowing
blowing
downward
ation is perf
o
r in range 35° with the Fixed position as
.
exceeded either upper or lower limit position,
Upper Limit
Position.
o
17.5
Swing
o
17.5
o
range 35
Fixed Position
Lower Limit
before start
Position.
swing.
Inclined
Horizontal
blowing
blowing
Upper Limit
o
5
Position.
Fixed
o
30
Position
before start
swing
Swing
Lower Limit
o
range 35
Position
33
–
–
FILE NO. SVM-13003
Description
• The louver position can
be arbitrarily set up by
pushing [FIX] button.
• Swing
When pressing
[SWING] b
u
tton dur
ing
oper
ation, the louv
er
star
ts s
winging.