Options - Toshiba e-studio306LP Quick Start Manual

Chapter 6 INFORMATION ABOUT EQUIPMENT

Options

The following options are sold separately, and upgrade the performance of the equipment if installed. For details,
contact your service technician or representative.
6
Other options available are as follows. Contact your service technician or representative for details.
Work Table (KK-4550)
This is a small table for placing originals while the equipment is
being operated.
Installed on the right-hand side of the equipment.
FAX Unit (GD-150)
This is a unit for using the equipment as a Fax machine.
Installed inside of the equipment.
nd Line for FAX Unit (GD-160)
This unit enables you to add a line to the Fax, making a 2nd line
available.
• Installed inside of the equipment.
• The FAX Unit (optional, GD-1250) is required.
Desk (MH-50)
This is a desk for the equipment.
Accessible Arm (KK-550)
This enables a user in a wheelchair to close the Reversing
Automatic Document Feeder (MR-3026) while
remaining seated.
& P.59 "How to use the Accessible Arm" in this manual
Operator's Manual Pocket (KK-1660)
Keep the manual in this pocket.
Wireless LAN Module (GN-1060)
This module enables the equipment to be used in a wireless LAN
environment.
• Installed inside of the equipment.
• The Antenna (optional, GN-3010) is required.
• The equipment cannot be connected to the wireless and wired
LAN at the same time.
58
1 2
3
5 4
Antenna (GN-010)
This is used when the Wireless LAN Module is installed.
e-BRIDGE ID Gate (KP-004, KP-005)
You can log in and use the equipment simply by holding the IC
card over the e-BRIDGE ID Gate.
• Installed on the right-hand side of the equipment.
Data Overwrite Enabler (GP-1070)
This is an enabler to erase the data stored temporarily when
copying, printing, scanning, faxing, Internet Fax or network Fax
is performed. It overwrites temporarily stored data with random
data.
IPsec Enabler (GP-1080)
This enables the IPsec function in this equipment.
Meta Scan Enabler (GS-1010)
This enables the Meta Scan function in this equipment.
External Interface Enabler (GS-100)
This enables the EWB function in this equipment.
Unicode Font Enabler (GS-1007)
This enables printing from the SAP environment using Unicode
font with this equipment.
Depending on the model, options have been already
installed and the functions can be used.
1.
Original Cover (KA-1640PC)
This is used to hold an original.
.
Reversing Automatic Document Feeder
(MR-06)
This unit automatically feeds a stack of originals
one by one to have them copied.
.
Job Separator (MJ-5009)
Enables Faxes, copies and prints to be output onto
separate paper trays.
4.
Paper Feed Pedestal (KD-10)
Use the Paper Feed Pedestal to add one drawer.
This pedestal enables you to install the Additional
Drawer Module (optional, MY-1042).
5.
Additional Drawer Module (MY-104)
This drawer can be added to the Paper Feed
Pedestal (optional, KD-1033). Combined with the
2 drawers in the equipment, paper can be fed
from 4 drawers in total.
6.
Paper Reusable Device (e-STUDIO RD0)
This device enables you to erase paper printed by
the equipment.