Toshiba e-studio306LP Quick Start Manual page 68

Chapter 6 INFORMATION ABOUT EQUIPMENT
Job Separator (MJ-5009)
Model name
Acceptable paper
size
Acceptable paper
weight
Loading capacity
Power source
Dimensions
Weight
*1 The lower stacker is used for paper exiting.
*2 The value in the parentheses is the number of 80 g/m
FAX Unit
Model Name
Size of Original
Recording Paper Size
Compatibility
Communication Modes
Communication
Resolution
Transmission Rate
Encoding Systems
Memory Capacity
Unit Type
Applicable Network
*1 For hard drives, MB means 1 million bytes.
(Total HDD accessible capacity may vary depending on operating environment.)
For details of the FAX Unit (GD-1250), refer to the following guide:
& GD-1250/GD-1260/GD-1270 Operator's Manual for FAX Unit: "Chapter 1: BEFORE USING FAX"
Toshiba-recommended paper is used for the values above. Specifications and appearance are subject to change without
notice in the interest of product improvement.
66
MJ-5009
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP, 13"LG, 8.5"SQ, 8K, 16K,
Standard size
16K-R
Non-Standard size Length: 100 - 297 mm (3.9 - 11.7"), Width: 148 - 432 mm (5.8 - 17")
Upper stacker
64 - 80 g/m
Lower stacker 64 - 80 g/m
Upper stacker 25 mm, 0.98" (150 sheets)
Lower stacker
40 mm, 1.57" (250 sheets)
Supplied from the equipment
498 mm (19.6") (W) x 415 mm (16.3") (D) x 153 mm (6.0") (H)
Approx. 3.3 kg (7.3 lb.)
GD-1250
A3, A4, A4-R, A5, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST, ST-R, COMP
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP
Exclusive Mode, ECM, G3
Horizontal: 8 dots/mm, 16 dots/mm, 300 dots/inch
Vertical: 3.85 lines/mm, 7.7 lines/mm, 15.4 lines/mm, 300 dots/inch
33,600/31,200/28,800/26,400/24,000/21,600/19,200/16,800/14,400/12,000/9,600/7,200/4,800/2,400 bps
JBIG/MMR/MR/MH
Transmission/Reception: 1 GB (HDD)
Desktop type, transmitting/receiving dual type
Public Switched Telephone Network (PSTN)
, 17 - 20 lb. Bond
2
, 17 - 20 lb. Bond
2
*2
*2
or 20 lb. Bond sheets.
2
*1