Explaining Operations To The Owner; Pump Down Procedure(When Removing The Product) - Samsung RJ040F2HXEB Installation Manual

A

Explaining operations to the owner

Before leaving the premises on which you have installed the air conditioner,
you should explain the following operations to the owner, making
reference to the appropriate pages in the owner's instruction booklet.
1. How to start and stop the air conditioner.
2. How to select the operating mode and adjust the temperature and fan settings.
3. How to adjust the air flow direction.
4. How to set the timers.
5. How to remove and clean the filters.
≫ Once the owner is happy with the basic operations, hand over the owner's instruction ooklet and this installation
manual for storage in a handy and safe place.

Pump down procedure(when removing the product)

1. Turn on the air conditioner and select Cool mode or pump down mode to run the compressor for 3 minutes.
2. Release the valve caps on High and Low pressure side.
3. Use L wrench to close the valve on the high pressure side.
4. Approximately 2 minutes after, close the valve on the low pressure side.
5. Stop operation of the air conditioner.
6. Disconnect the pipes.
35