Samsung RJ040F2HXEB Installation Manual page 30

Setting an indoor unit address and installation option
A
•  W hen"A"~"F"isenteredtoSEG4~6,theindoorunitMAINADDRESSisnotchanged.
•  I fyousettheSEG3as0,theindoorunitwillmaintainthepreviousMAINADDRESSevenifyouinputtheoptionvalueofSEG4~6.
•  I fyousettheSEG9as0,theindoorunitwillmaintainpreviousRMCADDRESSevenifyouinputtheoptionvalueofSEG11~12.
5. The MAIN address is for commnication between the indoor unit and the outdoor unit. Therefore, you must set it to
operate the air conditioner properly.
Setting an indoor unit installation option (suitable for the condition of each installation location)
1. Check whether power is supplied or not.
- When the indoor unit is not plugged in, there should be additional power
supply in the indoor unit.
2. The panel(display ) should be connected to an indoor unit to receive option.
3. Before installing the indoor unit, assign an option to the indoor unit according
to the air conditioning system plan.
- The default setting of an indoor unit installation option is "02000-100000-200000-300000".
- Individual control of a remote controller(SEG20) is The function that controls an indoor unit individually when there is
more than one indoor unit.
4. Set the indoor unit option by wireless remote controller.
- When entering Address option, connect remote controller receiver.
Option SEG1
Explanation PAGE
Indication Details Indication
Indication and Details
Option SEG7
Explanation PAGE
Indication Details Indication
Indication and Details
Option SEG13
Explanation PAGE
Indication Details Indication
Indication and Details
Option SEG19
Explanation PAGE
Indication Details Indication
Indication and Details
▶ If you input a number other than 0~4 of the individual control of the indoor unit(SEG20), the indoor is set as "indoor 1".
30
SEG2
MODE
Details
0 2
SEG8
Details
1 0
SEG14
External control
Details
0 No use
2 1 On/Off control
2 Off control
SEG20
Details
3 0
SEG3 SEG4
Indication Details Indication
0
SEG9 SEG10
Indication Details Indication
0
SEG15 SEG16
External control output
Indication Details Indication
0 Thermo ON
1 Operation ON
SEG21 SEG22
Indication Details Indication
0
Indoor Unit
1(L)
2(N)
SEG5
Central control
Details Indication Details
0 No use
0
1 Use
SEG11
Details Indication Details
0 0
SEG17
Buzzer
Details Indication Details
0 Use
0
1 No Use
SEG23
Details Indication Details
0 0
F2
F1
SEG6
Indication Details
0
SEG12
Master / Slave
Indication Details
0 Master
1 Slave
SEG18
Indication Details
0
SEG24
Indication Details
0