Adjusting The Paper Cassette For The Paper Length - Panasonic UF-585 Service Manual

Panasonic UF-585 / 595
8.6

Adjusting the Paper Cassette for the Paper Length

How to Adjust the Paper Cassette for the Paper Length
The factory default Paper Length setting for the Paper Cassette is on Letter size. To change the paper length to
A4 or Legal size, follow the steps below.
1
Paper Width Guide
Max. Paper
Capacity Mark
2
The Recording Paper Size setting of the Fax Parameter No. 23 must match the paper loaded in the cassette.
If you change the Recording Paper Size, please change the setting accordingly. (See page 38 of the User's
Guide)
Note: If you forget to change the Recording Paper Size setting in Fax Parameter No. 23 when different paper is installed
in the cassette, the unit will Stop printing after the 1st page of an Incoming Fax and display a " PAPER SIZE
MISMATCH" error. Then, the Recording Paper size setting automatically adjusts to the proper size and the unit
resumes printing the Incoming Fax from the 1st page.
252
(1) Remove the paper from the Paper
Release Latch
(2) While pushing down on the release latch,
(3) Turn the Paper Cassette upright.
(4) Insert the Paper Length Guide hooks into
(5) Load the paper into the Paper cassette.
Paper Length Guide
Caution: Make sure that the paper is set
LTR
A4
LGL (6) Replace the Paper Cassette Cover to the
(7) Slide the Paper Cassette into the machine.
Cassette and place the cassette upside
down on a flat surface.
pull out the Paper Length Guide.
the appropriate paper length slots (A4 or
Legal) and slide the guide towards the
back of the cassette until it locks in place.
Slide the paper width guide to the left until it
lightly touches the stack of paper without
bending the paper. The paper must fit
squarely and firmly between the Paper
Width Guide and the right side of tray. If it
does not, the paper may feed into the
printer incorrectly resulting in a paper jam.
under the metal Paper Separation
Clips and that it does not exceed
the Maximum Paper Capacity Mark.
You can load about 250 sheets (20
lb weight). For paper specification,
see page 154 of the User's Guide.
appropriate paper position (LTR, A4 or
LGL).