6.1.3
Receive Mechanism
The Receive Mechanism consists of the Laser Unit (LSU), OPC (Organic Photo Conductor) Drum, and various other parts which
ensure the normal feeding of recording paper. These components and their functions are as follows:
Paper Feed Units No.1 and 2
UF-585: Paper Feeder Unit No. 2 is not available.
UF-595: Paper Feeder Unit No. 2 is available as an option.
Paper Feed Unit No.1 Operation
1. The printing operation begins when the nPRNT (Print Request) output signal level goes Low. The Printer Motor (626) is
initialized.
2. The Paper Feed Solenoid (531) is energized for a specified period of time and turned ON. This activates the Paper Feed
Roller (518), which rotates one revolution. The paper is separated into individual sheets by the L and R Paper Separation
Clips (809 and 811) and transported to the Feed Roller (526).
3. After one revolution the Paper Feed Roller (518) stops, releasing the paper. The Feed Roller (526) transports the paper to
the drum area.
4. The actual printing process starts at a specified time after the Timing Actuator (609) is activated and stops at a a specified
period of time after the trailing edge clears the Timing Actuator (609).
System Description
189