Control Panel Unit, Pnl1 Pc Board (231), Lcd Unit (233) - Panasonic UF-585 Service Manual

Panasonic UF-585 / 595
2.4

Control Panel Unit, PNL1 PC Board (231), LCD Unit (233)

(5)
(4) (5) (5)
(12)
24
(1)
(2)
(6)
(7)
(8)
(9)
(11)
(10)
(1) Open the Printer Cover (106)
(2) Slightly open the Control Panel Unit.
(3) Remove the Left Cover (103) and the Right Cover (102).
(Refer to 2.3)
(4) Disconnect Connector CN4 on the SCA/SCB PC Board.
(5) Release the Stopper Latch (210) and open the Control
Panel Unit.
(6) Remove the Control Panel Unit.
(7) 2 Screws (19).
(8) Remove the Control Panel Chassis (201) Assembly.
Note:
If noise occurs while scanning, clean the Roller Shaft 2 (235)
and the Feed Pinch Roller (236) shaft hole with isopropyl
alcohol.
(9) 16 Screws (7B).
(10) Disconnect Connector CN40 on the PNL1 PC Board.
(11) Release 1 Latch Hook.
(12) Remove the PNL1 PC Board (231).