Table of Contents
Advertisement
3.1
Main body section
3.1.1 Removing the top cover
(See Figs.1 and 2)
(1) From the both sides of the main body, remove the four
screws A attaching the top cover. (See Fig.1)
(2) From the back side of the main body, remove the five
screws B and screw C attaching the top cover. (See Fig.2)
(3) Remove the top cover in the direction of the arrow. (See
Fig.1.)
3.1.2 Removing the HDMI board
(See Fig.3)
• Remove the top cover.
(1) From the back side of the main body, remove the three
screws D attaching the HDMI board to the rear panel.
(2) From the top side of the main body, remove the screw E at-
taching the HDMI board to the support bracket.
(3) Disconnect the card wires from the connectors (CN731,
CN732, CN762) on the HDMI board.
(4) Take out the HDMI board from the main body and discon-
nect the parallel wires from the connectors (CN771,
CN772) on the reverse side of the HDMI board.
Reference:
Remove the shield from the HDMI board as required.
SECTION 3
DISASSEMBLY
B
B
CN731
CN771
Top cover
A
Fig.1
C
Fig.2
Support bracket
CN732
E
Shield
CN772
HDMI board
CN762
D
Rear panel
Fig.3
Top cover
B
(No.MB448)1-7
Advertisement
Table of Contents
