Disassembly - JVC KW-ADV793J Service Manual

Dvd receiver with monitor

Table of Contents

3.1

Main body (Used model: KW-AVX810)

3.1.1 Removing the Front panel (See Fig.1, 2, 3, 4)

(1) From the bottom side of the main body, insert the screw-

driver to hole of the third gear from hole a of the bottom

chassis, and then turn the gear to clockwise until Front

panel comes up. (See Fig.1)

(2) Remove the two screws A attaching the both side of the

Front panel. (See Fig.2)

(3) Remove the three screws B attaching the FPC cover. (See

Fig.3)

1-10 (No.MA473<Rev.002>)

SECTION 3

DISASSEMBLY

hole

Fig.1

Fig.2

Fig.3

(4) Disconnect the FPC from Front panel connected to con-

nectors

CN106

and

CN107

3.1.2 Removing the Heat sink (See Fig.5)

(1) Remove the three screws C and two screws D attaching

the Heat sink.

3.1.3 Removing the Rear heat sink (See Fig 6)

(1) Remove the three screws E attaching the Rear heat sink.

of the Main board. (See Fig.4)

CN106

Fig.4

Fig.5

Fig.6

Table of Contents