Optional Modules - Samsung OfficeServ 7400 General Description Manual

Optional Modules

The optional modules available to mount on the LP40 module are the MFM, MIS, RCM2,
SCM and CRM modules.
Multi-Frequency Module (MFM): MFM contains ASIC chips for detecting DTMF sig-
nals. It can detect DTFM signals from 12 channels simultaneously. MFM is installed in
LOC1 or LOC2 of the LP40 (the location is indicated on the LP40 module).
Miscellaneous (MIS): MIS provides the external hold sound source input ports, external
paging ports, loud bell ports and common bell ports. Two dry ports connect or block the
power supply and signal transfers with external devices. MIS is installed in LOC3 of the
LP40 module (the location is indicated on the LP40 module).
R2 CID Module 2 (RCM2): RCM2 detects and generates Caller Identification (CID)
from 14 channels. It selects an operation mode (detection and generated signal) as R2 or
CID using a switch in the module. It is installed in LOC1 or LOC2 of the LP40 module
(the location is indicated on the LP40 module).
Note: The R2 function is not currently available but is planned for a future release.
Switch Conference Module (SCM): SCM performs the Conference function. Up to 12
groups can hold conferences (max. five persons per group). SCM detects DTFM signals
transmitted from 12 channels. It is installed in LOC1 or LOC2 of the LP40 module (the
location is indicated on the LP40 module)
Common Resource Module (CRM): CRM detects and generates DTMF signals and CID
signals. It is installed in LOC1 or LOC2 of the LP 40 module (the location is indicated
on the LP40 module).
© Samsung Business Communications
OfficeServ 7400 General Description
2-9