Chapter 2. Installation Guide; Before You Begin; Hardware Installation; Software Installation - TP-Link TL-WN422G User Manual

High-gain wireless usb adapter

Hide thumbs Also See for TL-WN422G:

Table of Contents

Chapter 2. Installation Guide

The operating distance range of your wireless connection can vary significantly depending on

the physical position of the wireless devices. Factors that can weaken signals by getting in the

way of your network's radio waves are metal appliances or obstructions, and walls. Typical

ranges vary base on the types of materials and background RF (radio frequency) noise in your

home or office.

For best performance of your wireless network, you are suggested to:

Place your computer with this wireless card near the operating wireless router.

Avoid redundant obstacles and interference between the wireless devices.

Keep your product far from electrical devices or appliances that generate RF noise, such

as microwave ovens, 2.4 GHz cordless phone.

There are two ways to install the Adapter:

1. Plug the Adapter directly to the USB port on your computer.

2. Connect the Adapter and your computer with the extension USB cable attached in package.

Note:

Once the Adapter is firmly in place, the Found New Hardware Wizard screen will pop up.

Follow the steps below to install the TL-WN422G High-Gain Wireless USB Adapter drivers:

When Found New Hardware Wizard is prompted, click Cancel, and insert the Resource CD

into your CD-ROM drive. The autorun.exe will automatically run. Highlight TL-WN422G and

select the Driver to start the installation according to the operating system of your computer.

TL-WN422G

High-Gain Wireless USB Adapter User Guide

Table of Contents

Show Quick Links

Table of Contents