Table of Contents
Advertisement
TL-WN422G
Chapter 2
Installation Guide
2.1 Before You Begin
The operating distance range of your wireless connection can vary significantly depending
on the physical position of the wireless devices. Factors that can weaken signals by getting
in the way of your network's radio waves are metal appliances or obstructions, and walls.
Typical ranges vary base on the types of materials and background RF (radio frequency)
noise in your home or office.
For best performance of your wireless network, you are suggested to:
1.
Place your computer with this wireless card near the operating wireless router.
2.
Avoid redundant obstacles and interference between the wireless devices.
3.
Keep your product far from electrical devices or appliances that generate RF noise,
such as microwave ovens, 2.4 GHz cordless phone.
2.2 Hardware Installation
There are two ways to install the Adapter:
1. Plug the Adapter directly to the USB port on your computer.
2. Connect the Adapter and your computer with the extension USB cable attached in
package.
Note:
Once the Adapter is firmly in place, the Found New Hardware Wizard screen will pop up.
2.3 Installation for Windows XP
Follow the steps below in order to install the TL-WN422G High-Gain Wireless USB Adapter
drivers:
1.
Insert the Resource CD into your CD-ROM drive, and open the folder named
TL-WN422G. Then double-click Setup.exe in the proper folder according to your
operating system to start the installation.
Once the setup begins you will see the Install Shield Wizard, as the image depicts as
below.
High-Gain Wireless USB Adapter User Guide
-
-
5
Advertisement
Table of Contents
