JRC JMA-9172-SA Instruction Manual page 370

JMA-9172-SA Instruction Manual
7.4.4.3 Save of Scanner Unit Time (TXRX To Display Unit)
Save the following scanner unit time data from the scanner unit into the display unit.
Perform the following procedure of 7.4.4.4 to inherit the scanner unit time data when the
TXRX's internal control circuit is replaced.
Procedures
1) Open the Serviceman Menu.
2) Perform the following menu open procedure to open the TXRX to
Display Unit menu.
3) Select
The scanner unit time data in the TXRX's internal control circuit is saved transferred to the
display unit.
7.4.4.4 Restoration of Antenna Time (Display Unit To TXRX)
Restore the antenna time data from the display unit into the antenna's internal control circuit.
Perform the above procedure of 7.4.4.3 to inherit the antenna time data when the antenna's
internal control circuit is replaced.
Procedures
1) Open the Serviceman Menu.
2) Perform the following menu open procedure to open the Display
Unit to TXRX menu.
3) Select
The scanner unit time data in the display unit is restored transferred to the antenna's internal
control circuit.
>
7.SETTINGS FOR SYSTEM OPERATION
During performance monitor adjustment, all acquisitions by the
target tracking function are released.
The released target acquisitions are not recovered.
3. Maintenance Menu
→
5. TXRX Time
→
3. TXRX To Display Unit
in the Confirmation Menu.
1. Yes
3. Maintenance Menu
→
5. TXRX Time
→ 4. Display Unit To TXRX
in the Confirmation Menu.
1. Yes
7－ 42
>
7.4 MAINTENANCE MENU