Table of Contents
Advertisement
Bosch Recording Station Appliance
2.3
BRS 19-inch 1U
Front view:
There are several LEDs on the control panel and on the drive carriers. The LEDs display the
system and component status. This chapter explains the meanings of all LED indicators and
the appropriate responses that need to be taken.
Rear view:
2.3.1
Control Panel Buttons
There are two push-buttons located on the front of the chassis. These are a reset button and a
power on/off button.
Bosch Security Systems
1
Overheat/Fan Fail
2
NIC1/NIC2
3
HDD
4
Power
5
Reset
6
Power on/off
1
2x mains connection 100 - 240 VAC, 50 - 60 Hz
2
Keyboard - Mouse
Note: We recommend using PS2 mouse and keyboard.
3
2x USB
4
Serial interface COM1
5
Monitor (VGA)
Note: Use only for configuration and maintenance purposes.
6
2x Ethernet (RJ45)
Reset
The reset button is used to restart the system.
Power on/off
The main power switch is used to apply or remove power from the power supply
to the system. Turning off system power with this button removes the main power
but keeps standby power supplied to the system. Therefore, you must unplug
system before servicing.
Hardware Installation Manual
System Overview | en
15
- | V1 | 2011.10
Advertisement
Table of Contents
