Electronic Module - Electrolux EWM 1000 AEG Service Manual

Electronic Module

The electronic module, including the μP, controls various functions and is placed in a protective housing.
Functions:
- Taking data of the selected cycle programs through the module.
- Water level control in the washtub; a pressure switch detecting the level.
- Cycle temperature control by a NTC sensor.
- Power supply of the heating element.
- Power supply of the drive motor and control of its speed by the tachymetric generator.
- Control of water inlet valves.
- Drain pump and door lock control.
In case of a power failure the module saves the just paused cycle.
- When the power supply to the appliance is restored again, the cycle starts where the program was
paused.
DGS-TDS-N 11.06 R.B. © Electrolux
- 7 -
599 51 50 25 EN