Pioneer VSX-1017AV-K Service Manual page 14

1
Rear Panel (VSX-90TXV/VSX-1017TXV-K)
A
B
Caution
• Before making or changing the connections, switch
off the power and disconnect the power cord from the
power outlet. Plugging in should be the final step.
1 HDMI connectors (x3)
Two inputs and one output for high-quality audio/video
connection to compatible HDMI devices.
2 XM Radio input
C
3 Coaxial digital audio inputs (x2)
Use for digital audio sources, including DVD players/
recorders, digital satellite receivers, CD players, etc.
4 Optical digital audio output/input(s) (x4)
Use the OUT jack for recording to a CD or MiniDisc
recorder.
Use the IN jacks for digital audio sources, including DVD
players/recorders, digital satellite receivers, CD players,
etc.
5 Control input/output
Use to connect other Pioneer components so that you
D
can control all your equipment from a single IR remote
sensor.
6 Stereo analog audio source inputs/(outputs) (x3)
Use for connection to audio sources such as CD players,
tape decks, turntables, etc.
(*) 7 Remote input (MULTI-ZONE and source)
Use for connection to an external remote control sensor
for use in a MULTI-ZONE setup, for example.
8 Component video connections (x4)
Use the inputs to connect any video source that has
component video output, such as a DVD recorder. Use
the output for connection to a monitor or TV.
E
F
14
1
2
(*)
CENTE CENTER
L
IN OUT IN OUT IN
DVR/VCR1 DVR/VCR1 DVR/VCR2 DVR/VCR2
VSX-1017AV-K
2
3
(*)
SPEAKERS
(*)
FRONT CENTER
R L
9 iPod input terminal
Use to connect your Apple iPod as an audio source.
10 Audio/video source inputs/(outputs) (x6)
Use for connection to audio/visual sources, such as DVD
players/recorders, VCRs, etc. Each set of inputs has jacks
for composite video, S-video and stereo analog audio.
11 AM and FM antenna terminals
Use to connect indoor or outdoor antennas for radio
broadcasts.
12 Multichannel pre-amplifier outputs
Use to connect separate amplifiers for front, center,
surround, surround back and subwoofer channels.
13 Composite and S-video monitor outputs
Use to connect monitors and TVs.
14 Multichannel analog audio inputs
7.1 channel inputs for connection to a DVD player with
multichannel analog outputs.
(*) 15 12 V trigger jack (total 50 mA max.)
Use to switch components in your system on and off
according to the input function of the receiver.
(*) 16 MULTI-ZONE and source outputs
Use to connect a second amplifier in a separate zone.
17 SIRIUS Radio input
18 Speaker terminals
Use for connection to the main front, center, surround
and surround back speakers.
19 Switched AC power outlet (100 W/0.8 A max.)
Use to power another component in the system. Power to
the outlet switches on and off with the receiver.
(*) VSX-90TXV Only
3
4
19
OUTLET
SWITCHED 100 W(0.8 A) MAX
SURROUND SURROUND BACK
R L
R
4