Pioneer VSX-1017AV-K Service Manual page 13

5
Rear Panel (VSX-1017AV-K/VSX-1017AV-S)
Caution
• Before making or changing the connections, switch
off the power and disconnect the power cord from the
power outlet. Plugging in should be the final step.
1 HDMI connectors (x3)
Two inputs and one output for high-quality audio/video
connection to compatible HDMI devices.
2 Coaxial digital audio inputs (x2)
Use for digital audio sources, including DVD players/
recorders, digital satellite receivers, CD players, etc.
3 Optical digital audio output/input(s) (x4)
Use the OUT jack for recording to a CD or MiniDisc
recorder.
Use the IN jacks for digital audio sources, including DVD
players/recorders, digital satellite receivers, CD players,
etc.
4 Control input/output
Use to connect other Pioneer components so that you
can control all your equipment from a single IR remote
sensor.
5 Stereo analog audio source inputs/(outputs) (x3)
Use for connection to audio sources such as CD players,
tape decks, turntables, etc.
Note
1You must connect your monitor/TV to the receiver's HDMI/component video outputs when connecting these video sources. If the video signal does not
appear on your TV or plasma display, try adjusting the resolution settings on your component or display. Note that some components (such as video game
units) have resolutions that may not be converted. In this case, use an (analog) S-video or composite connection.
5
6
9
PRE OUT
CENTER CENTE (Single)
L L
RROUND
CK CK
IN OUT IN OUT IN
DVR/VCR1 DVR/VCR2
VSX-1017AV-K
6
7
R
D
13
A
6 Component video connections (x4)
Use the inputs to connect any video source that has
component video output, such as a DVD recorder. Use
the output for connection to a monitor or TV.
7 Audio/video source inputs/(outputs) (x6)
Use for connection to audio/visual sources, such as DVD
players/recorders, VCRs, etc. Each set of inputs has jacks
for composite video, S-video and stereo analog audio.
8 iPod input terminal
Use to connect your Apple iPod as an audio source.
9 AM and FM antenna terminals
Use to connect indoor or outdoor antennas for radio
broadcasts.
10 Multichannel pre-amplifier outputs
Use to connect separate amplifiers for front, center,
surround, surround back and subwoofer channels.
11 Composite and S-video monitor outputs
Use to connect monitors and TVs.
12 Multichannel analog audio inputs
7.1 channel inputs for connection to a DVD player with
multichannel analog outputs.
13 Speaker terminals
Use for connection to the main front, center, surround
and surround back speakers.
7
8
A
B
C
D
E
F
13
8