•
Press the [LINE] softkey.
•
Use the [UP] and [DOWN] buttons to select the desired line, then press the [SELECT] softkey.
Volume Adjustment
To change the ringer volume:
•
Press the [MENU] softkey, then select the "Initial settings" icon (a wrench).
•
Select the "Ringer settings" option, then "Ringer volume."
•
Use the [UP] and [DOWN] buttons to adjust the volume. Press the [SAVE] softkey when done.
To change the in-call volume:
•
While on a call, use the [UP] and [DOWN] buttons to adjust the volume.
Call Recording
•
Any time during an incoming call, dial [*][7].
•
You will hear: "Recording is now on." The caller will hear the same message.
•
To end Call Recording, dial [*][7] again. You will hear: "Recording is now off."
•
Visit the Call Logs section of your account after the call has ended to review the recording.
Call Blocking
•
To block a caller from calling again (while on a conversation with them), dial [*][9].
•
You will hear a confirmation message.
•
If you pressed [*][9] by mistake, press it again to unblock the caller.
•
Upon disconnecting the call, that caller will not be able to call again.
•
Anonymous calls cannot be blocked. To block callers with hidden caller ID, refer to the Numbers
section in your account's Control Panel.
Additional User Features