Tilt Angle Adjustment; Wall Mounting - Panasonic KX-NT136 Quick Reference Manual

Tilt Angle Adjustment

4
3
2
1
Pull down the handset hook until it locks to prevent the
handset from slipping down from the operation board when at
step-angle 4.

Wall Mounting

1
Set the operation board to
step-angle 1.
3
Mount the unit on the wall.
83 mm
© 2004 Panasonic Communications Co., Ltd. All Rights Reserved.
All manuals and user guides at all-guides.com
The tilt angle of the operation board can be
adjusted to one of four angles.
To lift: Lift up the operation board to the desired
To set down: Lift up the operation board to the
2
4
step-angle (1 2
highest angle and then press down to
step-angle 1. Be careful not to get your
fingers caught between the base and
the operation board.
Connect the Ethernet cable, and then
attach first and then
mounting adaptor (included).
Pull down the handset hook until it locks,
so the tab holds the handset.
To temporarily place the handset down
during a conversation, hook it over the
top edge of the telephone as shown.
PSQX3298ZA
KK0904PY0 (E/GR)
3 4).
of the wall