Adjustments And Checks Required After Repair; Adjustment Sequence - Minolta Dimage XT Repair Manual

Adjustments and Checks Required After Repair

After making replacement or repair of the following items, check or adjust as required in the table.
Be sure to perform in a sequential order from the top in the table.
: Necessary check : Necessary adjustment
Adjustment/Check item
Lens Adjustment
AWB Adjustment
Missing Pixel (Defect)
Compensation Adjustment
Missing Pixel (Black)
Compensation Adjustment
LCD Monitor Adjustment
USB Storage Information
Registration
Resolving Power Check
Color Reproduction
Ambient Exposure Accuracy
Flash Exposure Accuracy
Grayscales
B.C. Lock Voltage
Current Consumption
Current Leak

Adjustment sequence

Some adjustments should be performed in the order
1.Lens Adjustment
2.AWB Adjustment
3.Missing Pixel (Defect)Compensation Adjustment
4.Missing Pixel (Black)Compensation Adjustment
Adjust in the order from 1 to 3.
Adjust 4 after 2.
The other adjustments can be done independently.
Note of the PW-1 Compl PWB (#0432,0452)
Never turn the VR501 and VR502 on the PW-1 Compl PWB (#0432,0452), or the PW-1 Compl PWB
(#0432,0452) has to be replaced.
The output voltage adjustment and the oscillating frequency adjustment of the individual PWB can only
be performed at the parts assembly line, not available with service facilities.
For the same reason, always replace with the PW-1 Compl PWB (#0432,0452) as a set.
CP-1
Parts
Compl
PWB
(#0408)
Replacement
Page 10
★
Page 11
★
Page 12
★
Page 13
★
Page 14
★
Page 18
★
Check List
☆
Check List
☆
Check List
☆
Check List
☆
Check List
☆
Check List
☆
Check List
☆
Check List
☆
PW-1 ST-1
Compl Compl
PWB PWB
(#0432,0452) (#0406)
Replacement Replacement
★ ★
★ ★
★ ★
★ ★
★ ★
☆ ☆
☆ ☆
☆ ☆
☆ ☆
☆ ☆
☆ ☆
☆ ☆
☆ ☆
(2786)A 7
Lens
LCD
Assy
(0460)
(#3254-0600)
Replacement Replacement
★
★
★
★
★
☆ ☆
☆ ☆
☆ ☆
☆ ☆
☆ ☆
☆ ☆
☆ ☆
☆ ☆