Missing Pixel (Black) Compensation Adjustment (Test In The Lcd Section) - Minolta Dimage XT Repair Manual

Missing Pixel (Black) Compensation Adjustment (in the LCD section)
The adjustment is an image correct function that can restore the black spots at exposure.
Whenever after replacing the CP-1 Compl PWB (#0408), the PW-1 Compl PWB (#0432,0452), the ST-1
Compl PWB (#0406) or the Lens Assy (#3255-0600), be sure to perform the adjustment.
Equipment Required
PC (IBM PC/AT Compatible Computer with the F/X Series Adjustment Program is installed)
USB cable USB-500
AC Adapter AC-6
Color Viewer LV1450DC
Preparation
Perform the adjustment 30 minutes or longer after turning on the Color Viewer.
Adjustment
1. Turn the mode dial to Auto-recording position.
2. Press the down key (w) to set the lens to the wideangle.
3. Set the Color Viewer from the front of the lens. (Fig.1)
4. Connect the camera to the computer with the USB cable USB-500, and start Adjustment Program
(DscCalDi.exe).
5. Click the scroll arrow of "Test" in the LCD section of the adjustment screen, and select "CCD Black"
from the pop-up menu of "Test".
The camera electronically makes exposure to map out dead pixels. Up to 512 pixels can be restored
at a time. The number of the missing pixels is displayed on the screen. (Fig. 2)
6. Click "OK" on the screen to return to the adjustment screen.
Adjustment Error ("Defect NG")
When the "Defect NG" appears during adjustment, the CCD may be defective.
-Replace the Lens Barrel Assy (#3255-0600).
Fig. 1 Fig. 1 Fig. 1 Fig. 1 Fig. 1
Camera Camera Camera
Camera Camera
Fig. 2 Fig. 2 Fig. 2
Color Viewer LV1450DC Color Viewer LV1450DC
Color Viewer LV1450DC Color Viewer LV1450DC Color Viewer LV1450DC
(2786)A 13
Fig. 2 Fig. 2
DSC
Dsc Calibration
Cal.
CCD Black Results :
number=0
OK
Copy