Location And Function Of Parts; Front Panel - Sony DVCAM DSR-80 Operating Instructions Manual

Location and Function of Parts

Features

Front Panel

1 Cassette compartment
2 REMOTE/LOCAL switch
3 POWER switch
4 HEADPHONES control knob
5 HEADPHONES connector
6 CONTROL S connector
1 Cassette compartment
Accepts standard-size or mini-size DVCAM digital
videocassettes. When using a mini-size cassette, insert
it into the middle of the compartment.
For details of usable cassettes, see page 22.
2 REMOTE/LOCAL switch
Selects whether the unit is operated from its front
panel or from external (remote) equipment.
REMOTE : The unit is operated from an editing
controller connected to the REMOTE connector
on the rear panel.
LOCAL : The unit is operated from its front panel or
from a SIRCS-system remote controller connected
to the CONTROL S connector on the front panel.
8
Chapter 1 Overview
6 0 )
3 POWER switch
Press on the "1" side to power on the unit. This causes
the audio level meter and time counter display to light.
Press on the "¬" side to power off the unit.
4 HEADPHONES control knob
Controls the volume of the headphones connected to
the HEADPHONES connector.
5 HEADPHONES connector (stereo phone jack)
Connect a stereo headphones for headphone
monitoring during recording or playback.
The audio signal you want to monitor can be selected
with the MONITOR SELECT switches on the menu
control panel 4.
6 CONTROL S connector (stereo minijack)
Connect a SIRCS-system remote controller such as the
DSRM-10 or SVRM-100A.
1 Display section (A) and
video/audio input setting
section (see page 9)
2 Display section (B) and
COUNTER SELECT button
(see page 11)
p r
3 Tape transport control
section (see page 12)
4 Menu control panel
(inside of the door)
(see page 13)