Removing The Trim; Mounting The Trim - KTM 450 Rally Factory Replica Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.36

Removing the trim

11.37

Mounting the trim

–
Fill bleeding syringe
Bleed syringe (50329050000)
Hydraulic fluid (15) (
–
On the slave cylinder, remove bleeder screw
601361-10
–
Inject the fluid into the system until it escapes from hole
without bubbles.
–
To prevent overflow, drain the fluid occasionally from the master cylinder reservoir.
–
Remove the bleeding syringe. Mount and tighten the bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level under top level of container
–
Position the cover with the membrane. Mount and tighten the screws.
400247-10
–
Detach the plug-in connectors on the turn signal cables.
–
Open quick releases
–
Remove the trim toward the front.
601352-10
–
Attach the trim to guides
Info
When positioning the trim, exercise caution with counterpieces
quick releases to ensure that you do not damage the trim.
601353-10
with the appropriate fluid.
4
p. 117)
and mount bleeding syringe
5
4 mm (0.16 in)
.
1
.
1
57
.
4
of the master cylinder
6
of the
2