Operation Instructions; Setting Your Logo - Panasonic KX-FT931LA-B Service Manual

KX-FT931LA-B
Document weight
2
• Single sheet: 45 g/m to 90 g/m
• Multiple sheest: 60 g/m
Note:
• Remove clips, staples or other fasteners.
• Do not send or copy documents that are on the following
types of paper: (Make a copy of the document using another
copier and send the copy.)
— Chemically treated paper such as carbon or carbonless
duplicating paper
— Electrostatically charged paper
— Badly curled, creased or torn paper
— Paper with a coated surface
— Paper with a faint image
— Paper with printing on the opposite side that can be seen
through the other side, such as newsprint.
• Check that ink, paste or correction fluid has dried com-
pletely.
• To send a document with a width of less than 210 mm, we
recommend using a copy machine to copy the original docu-
ment onto A4 or letter-sized paper, then sending the copied
document.
2
2 2
to 80 g/m

9 Operation Instructions

9.1.

Setting Your Logo

Your logo will be printed on the top of each page sent from your
unit. The logo can be your name or the name of your company.
Note:
Refer to Other (P.9) for display message.
1. Press [MENU].
2. Press [ ] or [ ] repeatedly to display the following.
3. Press [SET].
• The cursor ( ) will appear on the display.
4. Enter your logo, up to 30 characters. See the following
character table below for details.
5. Press [SET].
• The next feature will be displayed.
6. Press [MENU].
52