Suzuki VL1500K5 Supplementary Service Manual page 60

Step 1 (When indicating P0115-H:)
1) Turn the ignition switch OFF.
2) Check the EOT sensor coupler for loose or poor contacts.
If OK, then check the EOT sensor lead wire continuity.
7
3) Remove the left frame upper cover.
(!VL1500 Service Manual 6-3)
4) Disconnect the EOT sensor coupler and ECM coupler.
5) Check the continuity between B/Bl wire A and terminal I.
6) Also, check the continuity between B/G wire B and terminal D.
" EOTS lead wire continuity: Continuity (,)
# 09900-25008: Multi-circuit tester set
09900-25009: Needle pointed probe set
- Tester knob indication: Continuity test (,)
Is the continuity OK?
YES Go to Step 2.
• B/BI, B/Br wire or sub harness (B/BI or B/G
wire) open.
NO
• Loose or poor contacts on the sub harness cou-
pler.
7) After repairing the trouble, clear the DTC using SDS tool.
(!Page 42)
VL1500K5 ('05-MODEL)
1
1
ECM coupler (Harness side)
1
Sub harness
B/BI B/BI
EOT
B/G B/Br
59
!
ECM