2.8.9 MEMORY UNIT TYPE B 32MB (G578)
Installation Procedure
Unplug the main machine power cord before you do the following procedure.
1.
Fax unit (
p.4-71 "Controller Unit")
2.
Push the memory unit [A] (32 MB) in the memory slot [B] until both lock levers lock the
memory unit.
3.
Reassemble the machine.
2.8.10 CHECK ALL CONNECTIONS
1.
Plug in the power cord. Then turn on the main switch.
2.
Enter the printer user mode. Then print the configuration page.
User Tools > Printer Settings > List Test Print > Config. Page
All installed options are shown in the "System Reference" column.
SM
2-41
Controller Options
M052/M053/M054