3-Cd Changer To Cdr Recording Options; Setting The Unit To Perform High-Speed Recording - JVC XL-R5000BK Instructions Manual

5
Select and enter the program source.
MULTI JOG
1. Select the source.
= + = + =
CD1 CD2 CD3
• The source can be selected in either direction using the MULTI
JOG dial on the main unit or the 4 and ¢ buttons on the
remote control.
• When the SET button is pressed, the programming and track
number flash.
6
Select and enter one of the tracks.
MULTI JOG
1. Select the track.
• After the track is entered, the amount of time remaining on the
CD-R or CD-RW appears in the display followed by the infor-
mation for the next step in the program.
7
Repeat steps 5 and 6 to continue programming
tracks.
• Up to 32 tracks can be programmed. The same track may be
programmed more than once.
• The Program Edit mode is stopped if 32 steps have been pro-
grammed or if there is no more time remaining on the CD-R or
CD-RW.
8
Press the CDR CONTROL 3 button to start
recording the program.
• Recording starts from the first step in the program, and stops
when the last step is finished.
• The program information is maintained in memory until one of
the disc trays (CD1, CD2, CD3) is opened.
When recording is complete
After "STOP DUBBING" is displayed, operation stops automati-
cally. It also stops automatically after the last step in the program is
finished.
To stop recording at any time
Press the 7 (stop) button.
The recording mode is released after "STOP DUBBING" is dis-
played.
Note
• If the source CD being recorded from the 3-CD changer is itself
a digital copy, digital recording cannot be performed. When this
occurs, the recording type will switch automatically from digital
to analog.
• The last program information (the most recently created pro-
gram still stored in the unit's memory) will be erased if the trays
of the 3-CD changer are opened and if listening Edit recording
is performed.
23
SET
2. Enter the Selection
+
SET
2. Enter the Selection
3-CD Changer to CDR
Recording Options
There are a number of advantages of having a 3-CD changer and
CDR in the same unit, mainly that the unit has direct control over
both components. Because of this, the following recording options
are available: high-speed (2x) recording and track spacing.
Setting the unit to perform
high-speed recording
High-speed (2x) recording is only possible for digital recording
from the 3-CD changer to the CDR.
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER
STANDBY
POWER
CANCEL 4 2
CD REC SYNCHRO
CD EDIT FINALIZE
1 2
4
5
7 8
10 +10
PLAY MODE REPEAT
4
PITCH +
PITCH 0
2
PITCH –
SHIFT
1
Press the CDR button on the remote control
while pointing at the unit to select the CDR
function.
2
When the unit is in the stop mode, press the
MENU button on the main unit (or the DISPLAY/
MENU button on the remote control while
holding down the SHIFT button)
3
Turn the MULTI JOG dial or press the 4/¢
button on the remote control until "DUB-
SPEED" appears in the display.
4
Press the SET button.
• The current setting is displayed on the screen. (The setting is 2X
by default.)
REC LEVEL
MIN MAX
MIX BALANCE PHONES LEVEL
MULTI JOG
– +
3,5
POWER
DISPLAY
MENU
2
CD 1
3
CD 2
6
CD 3
9
CONTROL 1
CD CDR
SET CANCEL
CANCEL
3,5
REC
REC MUTING
REMOTE CONTROL
RM-SXLR5000J