Program Playback Using The Remote Control - JVC XL-R5000BK Instructions Manual

Program playback using the
remote control
CD REC SYNCHRO DISPLAY
CD EDIT FINALIZE MENU
1 2
4 5
7 8
10 +10
PLAY MODE REPEAT SET
2
PITCH +
7
PITCH 0
PITCH –
SHIFT
REMOTE CONTROL
RM-SXLR5000J
1
Load the CDs whose tracks are to be
programmed into the 3-CD changer.
2
Press the PLAY MODE button while the unit is in
the CD stop mode to select PROGRAM.
• "PG NO PROGRAM" appears in the display when no program
has been made.
3
Press the SET button.
• "PG S01 CD1 1" is displayed. For details on the meaning of this
display, see step 3 on the previous page.
4
Select and enter the program source.
1. Select source
= + = + = +
CD1 CD2 CD3
• When the SET button is pressed, the programming step and
track number flash.
5
Select and enter the track.
1. Select the track.
6
Repeat steps 4 and 5 (this procedure can be
repeated for up to 32 tracks).
7
Press the 3 button to start program play.
• Operation stops automatically when all the programmed tracks
have been played.
17
POWER
CD 1
3
CD 2
6
CD 3
9
CONTROL
CD CDR
CANCEL
3,4,5
4,5
REC
REC MUTING
SET
2. Press this button
SET
2. Press this button.
To return the program mode to the normal status in the
stop mode
Repeatedly press PLAY MODE on the main unit or remote control
until the play time appears in the display window.
Main Unit
PLAY
MODE
Remote Control
PLAY MODE