Program Playback - JVC XL-R5000BK Instructions Manual

Program Playback

Up to 32 tracks can be programmed. Any tracks on CD1, CD2 and
CD3 can be selected.
1
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER
STANDBY
POWER
2 7 3,4,5
1
Insert CDs that contain tracks to be
programmed.
• Tracks on a CD which has not been inserted cannot be played
even when they have been programmed. Operation will simply
move on to the next step in the program.
2
Press the PLAY MODE button while the unit is in
the CD stop mode to select PROGRAM.
Normal display
(program mode canceled)
PROGRAM
RANDOM
• "PG NO PROGRAM" appears in the display when no program
has been made.
3
Press the SET button.
Programmed
step number
4
Select and enter the program source.
MULTI JOG
1. Select the source.
= + = + =
CD1 CD2 CD3
• The source can be selected in the reverse direction by turning
the MULTI JOG dial counterclockwise.
• When the SET button is pressed, the programming step and
track number flash.
• A disc loaded in the CDR cannot be selected.
REC LEVEL
MIN MAX
MIX BALANCE PHONES LEVEL
MULTI JOG
– +
4,5
Program source
Track number
SET
2. Enter the Selection
+
5
Select and enter one of the tracks.
MULTI JOG
1. Select the track.
• When track 2 on the CD1 is selected for program 1:
• When the selection is entered:
6
Repeat steps 4 and 5 to program up to 32 tracks
(when you try to program more than 32 tracks,
"MEMORY FULL" is displayed).
7
Press the 3 button to start program play.
• The numbers of the tracks which have been played are cleared
from the music calendar, and they are displayed when program
play is completed.
• Operation stops automatically when all the programmed tracks
have been played.
To clear a track from the program
To delete a programmed track, turn the MULTI JOG dial (or press
the 4/¢ buttons on the remote) in the stop mode until the
desired track is displayed in the screen. Press the CANCEL button
to delete the track from the program. All the tracks following the
erased one will automatically decrease by one and will be renum-
bered. To clear the entire program, press cancel until "PG NO
PROGRAM" is displayed in the screen.
To change contents of the program
In the stop mode, press the SET button followed by the CANCEL
button. Programmed steps will be erased in reverse order each time
the CANCEL button is pressed twice. Continue erasing in this
manner until the desired step number is reached. Follow program-
ming steps to reprogram tracks after the desired step.
To check the contents of the program
To check what has been programmed while the tracks are being
programmed, press the 7 (stop) button, and use the MULTI JOG
dial (or press the 4/¢ buttons on the remote) to check.
SET
2. Enter the Selection
16