Compactflash Card Installation - Enterasys X-Pedition XSR-1850 Getting Started Manual

CompactFlash Card Installation

Follow the steps below to install the CompactFlash card:
1. If your CF is formatted, first remove the cover plate as shown in
formatted, jump to
2. Seat the card in the PCMCIA interface as shown in
"Formatting the CompactFlash Card"
Figure 2-16 Removing CompactFlash Coverplate
Installing a CompactFlash Memory Card
Figure 2-16. If it is not
on page 2-12.
Figure 2-17.
XSR Getting Started Guide 2-11