Table of Contents
Advertisement
Installing a CompactFlash Memory Card
An optional CompactFlash (CF) memory card provides additional non-volatile storage
capabilities in various increments. The CF's controller interfaces with a host system allowing data
to be written to and read from the CF's flash memory module. The XSR supports Type I and II
CompactFlash card types. Refer to
The CF's memory is large enough to store image files. You can do so simply by using the Bootrom
Monitor mode
cflash: directory while in the flash: directory, enter:
XSR>copy <source_name> cflash:<destination_name>
CompactFlash Card Installation
Follow the steps below to install the CompactFlash card:
1.
If your CF is already formatted, first remove the cover plate as shown in
formatted, jump to
Figure 2-6
copy
command. For example, to copy a file from the Onboard flash: directory to the
Figure 2-6
Pin 1
"Formatting the CompactFlash Card"
Figure 2-7
for a generic illustration of the card.
Typical CompactFlash Card
Removing CompactFlash Cover Plate
Installing a CompactFlash Memory Card
Pin 50
Figure
2-7. If it is not
on page 2-6.
XSR Getting Started Guide 2-5
Advertisement
Table of Contents
