Installing A Compactflash Memory Card; Compactflash Card Installation - Enterasys X-Pedition XSR-3150 Getting Started Manual

Installing a CompactFlash Memory Card

An optional CompactFlash (CF) memory card provides additional non-volatile storage
capabilities in 8, 16, 32, or 64 Mbyte increments. The CF's controller interfaces with a host system
allowing data to be written to and read from the CF's flash memory module. The XSR supports
Type I and II CompactFlash card types. Refer to
The CF's memory is large enough to store image files. You can do so simply by using the Bootrom
Monitor mode
cflash: directory while in the flash: directory, enter:
XSR>copy <source_name> cflash:<destination_name>

CompactFlash Card Installation

Follow the steps below to install the CompactFlash card:
1. If your CF is already formatted, first remove the cover plate as shown in
formatted, jump to
2. Seat the card in the PCMCIA interface as shown in
copy
command. For example, to copy a file from the Onboard flash: directory to the
Figure 2-6
Pin 1
"Formatting the CompactFlash Card"
Figure 2-7
Figure 2-6
Typical CompactFlash Card
Removing CompactFlash Coverplate
Figure
Installing a CompactFlash Memory Card
for a generic illustration of the card.
Pin 50
Figure
on page 2-6.
2-8.
XSR Getting Started Guide 2-5
2-7. If it is not