Specifications - JVC RX-D401S Instructions Manual

Audio/video control receiver
Hide thumbs Also See for RX-D401S:
Table of Contents

Advertisement

Specifications

Designs and specifications are subject to change without
notice.
Amplifier
Output Power
At stereo operation:
Front channels:
110 W per channel, min. RMS, driven
into 6 Ω at 20 Hz to 20 kHz with no
more than 0.8% total harmonic
distortion.
At surround operation:
Front channels:
110 W per channel, min. RMS, driven into
6 Ω at 1 kHz with no more than 0.8% total
harmonic distortion.
110 W, min. RMS, driven into 6 Ω at 1 kHz,
Center channel:
with no more than 0.8% total harmonic
distortion.
Surround channels: 110 W per channel, min. RMS, driven into
6 Ω at 1 kHz, with no more than 0.8%
total harmonic distortion.
Surround back channels:
110 W per channel, min. RMS, driven into
6 Ω at 1 kHz, with no more than 0.8% total
harmonic distortion.
Audio
Audio Input Sensitivity/Impedance:
DVR/DVD, VCR, DBS, TV:
Audio Input (DIGITAL IN)*:
Coaxial: DIGITAL IN 1(DVR/DVD):
Optical: DIGITAL IN 2(DBS), 3(VCR):
USB: USB
* Corresponding to Linear PCM, Dolby Digital, and DTS (with
sampling frequency—32 kHz, 44.1 kHz, 48 kHz).
Audio Output Level:
DVR, VCR:
Signal-to-Noise Ratio ('66 IHF/'78 IHF): 80 dB/62 dB
Frequency Response (6 Ω):
Bass Boost:
Equalization (at DSP operation):
Center frequency:
63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz
Control range:
±8 dB
270 mV/47 kΩ
0.5 V(p-p)/75 Ω
–21 dBm to –15 dBm
(660 nm ±30 nm)
270 mV
20 Hz to 20 kHz (±1 dB)
+4 dB ±1 dB at 100 Hz
Video
Video Input Sensitivity/Impedance:
Composite video: DVR/DVD, VCR, DBS:
S-video: DVR/DVD, VCR, DBS:
Y (luminance):
C (chrominance, burst):
Component: DVR/DVD, VCR (DBS):
Y (luminance):
P
, P
:
B
R
Video Output Level/Impedance:
Composite video: DVR, VCR, MONITOR OUT:
S-video: DVR, VCR, MONITOR OUT:
Y (luminance):
C (chrominance, burst):
Component: MONITOR OUT:
Y (luminance):
P
, P
:
B
R
Synchronization:
HDMI
HDMI Input (Ver. 1.1): VCR (DBS), DVR/DVD
HDMI Output (Ver. 1.0): MONITOR OUT
FM tuner (IHF)
Tuning Range:
Usable Sensitivity:
Monaural:
50 dB Quieting Sensitivity:
Monaural:
Stereo:
Stereo Separation at REC OUT:
AM tuner
Tuning Range:
General
Power Requirements:
AC 120 V
Power Consumption:
150 W/200 VA (at operation)
0.9 W (in standby mode)
Dimensions (W x H x D): 435 mm x 91.5 mm x 371 mm
3
(17
Mass:
7.1 kg (15.7 lbs)
1 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.286 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.7 V(p-p)/75 Ω
1 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.286 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.7 V(p-p)/75 Ω
Negative
87.5 MHz to 108.0 MHz
12.8 dBf (1.2 µV/75 Ω)
16.0 dBf (1.7 µV/75 Ω)
37.5 dBf (20.5 µV/75 Ω)
35 dB at 1 kHz
530 kHz to 1 710 kHz
, 60 Hz
5
5
/
inches x 3
/
inches x 14
/
inches)
16
8
8
47

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-d402bRx-d401sjRx-d402bjD402b - av receiver

Table of Contents