Basic Hdd Operations - JVC NX-HD10 Instructions Manual

To change the information shown in the main display
Each time you press DISP/CHARA on the remote control,
the information in the main display changes as follows:
• Before playing—
1 2
3
Clock
1 Current album number
2 Total track number in the current album
3 Current library number (or assigned name)
4 Album title* appears following "ALBUM TITLE"
5 Total playing time of the current album
* If no title is assigned, "NO TITLE" will appear.
• While playing—
1 2
3
Clock
1 Current album number
2 Current track number
3 Current library number (or assigned name)
4 Elapsed playing time of the track
5 Album title* appears following "ALBUM TITLE"
6 Track title* appears following "TRACK TITLE"
* If no title is assigned, "NO TITLE" will appear.
The unit keeps scrolling the title to show the entire title.
About HDD indicator
Source is
"HDD," but no
4
data is recorded
2
About HDD lamp
(when dimmer is not activated)
• Blue (flashes) : HDD is preparing for playback.
5
• Blue (lights) : HDD is now ready for playback and
• Red (flashes) : HDD is preparing for recording.
• Red (lights)

Basic HDD Operations

While playing a track recorded in the HDD, you can do the
4
following operations.
To stop playback for a moment
Press HDD 3/8.
To resume play, press HDD 3/8 again.
5
To locate a particular point in a track during play
Press and hold ¢ or 4 during play.
• ¢ : Fast-forwards the tracks.
• 4 : Fast-reverses the tracks.
To go to another track
Press ¢ or 4 repeatedly.
6
• ¢ : Skips to the beginning of the next or succeeding
• 4 : Goes back to the beginning of the current or
Before starting play, you can continuously skip or go back
to any track by holding the button.
– 30 –
If assigned titles (album title or track title) are long
and cannot be shown at a time
During
Ready to
playback
play
(During this period, no remote control
operations are accepted.)
for recording, or it is now playing or
pausing.
: HDD is now recording.
tracks.
previous tracks.
Continued
During
a pause