Angle Selection - JVC HR-XVC33U Instructions Manual

Angle Selection

You can enjoy a variety of scene angles if the DVD VIDEO disc
contains "multi-angle" parts, where multiple cameras were used
to shoot the same scene from different angles.
If the disc contains "multi-angle" parts, "
screen at the beginning of the "multi-angle" part when "ON
SCREEN GUIDE" is set to "ON".
During playback
When using the on-screen bar
A
Access the on-screen bar.
Press PLAY SETUP twice. The on-screen bar appears on
the TV screen.
B
Select menu item.
Press w e to move 0 to
The following pop-up window appears under the selected
item.
Example: The first view angle is selected out of 3 view angles
recorded.
C
Select the view angle.
Press rt repeatedly to select the desired view angle,
then press OK.
Each time you press the button, the angle of the scene
changes.
To clear the on-screen bar
Press PLAY SETUP.
NOTE:
When "X" appears on the TV screen in step C, the current
scene is not recorded from multiple angles.
" appears on the TV
, then press OK.
When using the ANGLE button:
A
Access the menu.
Press ANGLE.
The following pop-up window appears on the TV screen.
Example: The first view angle is selected out of 3 view angles
recorded.
B
Select the view angle.
Press rt or ANGLE repeatedly to select the desired
view angle, then press OK.
Each time you press the button, the angle of the scene
changes.
The pop-up window disappears if no operation is done for
about 5 seconds.
Example:
1/3]2/3]3/3](Back to the beginning)
1
1
1
55
EN
1
2