Mode Set (Dvd Deck) - JVC HR-XVC33U Instructions Manual

80
EN
Mode Set
(DVD deck)
Turn on the TV and select the VCR channel (or AV
mode).
Slide the TV/VCR/DVD switch to the right.
You can change various mode settings on the Mode Set
screen by following the procedure described below.
For each mode setting, see pages 81 to 83.
LANGUAGE
PICTURE
AUDIO
OTHERS
MENU LANGUAGE ( pg. 22)
AUDIO LANGUAGE ( pg. 22)
SUBTITLE ( pg. 22)
ON SCREEN LANGUAGE (
MONITOR TYPE ( pg. 18, 81)
PICTURE SOURCE ( pg. 81)
SCREEN SAVER ( pg. 81)
MP3&WMA/JPEG ( pg. 81)
DIGITAL AUDIO OUTPUT (
ANALOG DOWN MIX ( pg. 82)
D. RANGE CONTROL ( pg. 82)
OUTPUT LEVEL ( pg. 82)
RESUME ( pg. 83)
ON SCREEN GUIDE ( pg. 83)
PARENTAL LOCK ( pg. 58)
The procedure shows how to set "RESUME" to "ON"
on the DVD Set Up menu screen as an example.
A
Turn on the unit.
Press POWER (1).
B
Select the DVD deck.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
On the Remote
Press DVD so that the DVD indicator lights up.
C
Access the DVD Set Up menu screen.
A Press SET UP MENU.
B Press w e to select
" OTHERS".
Each time you press the
button, the setup menus
change as follows;
LANGUAGE]
](Back to the beginning)
D
Select the mode.
Press rt to move 0 to "RESUME", then press OK.
E
Select the mode setting.
Press rt to select "ON", then press OK.
F
Return to the normal screen.
Press SET UP MENU.
pg. 21)
pg. 81)
SUBSIDIARY SETTINGS (cont.)
OTHERS
RESUME
ON SCREEN GUIDE
PARENTAL LOCK
SELECT
OK
PICTURE] AUDIO ]
ON
ON
USE TO SELECT, USE OK TO CONFIRM.
TO EXIT, PRESS [SET UP MENU].
OTHERS