Child Lock; Tray Lock - JVC HR-XVC37U Instructions Manual

Others Settings
8 RESUME
ON
OFF
8 ON SCREEN GUIDE
ON
OFF

Child Lock

Turn on the TV and select the VCR channel (or AV
mode).
Slide the TV/VCR/DVD switch to the right.
You can disable the unit's operation.
A
Set the Child Lock.
Press and hold POWER (1) on the Remote for more
than 10 seconds while the unit is turned on. The unit
turns off, and "CL" appears on the front display panel.
To release the child lock, press and hold POWER (1) on the
Remote until the unit turns on.
NOTES:
When the child lock function is in use, keep the Remote out of
the children's reach.
Timer recording programs will be performed even if the child
lock function activated.
When this function is set to "ON", you can use the resume function.
( pg. 45)
ON: You can start playback from the resume point of the
placed disc.
OFF: You cannot use the resume function.
NOTE:
This function is not available for Audio CDs and MP3 discs.
When this function is set to "ON", the unit can display "on-screen
guide" icons or characters which shows the conditions of the unit or
disc.

Tray Lock

Turn on the TV and select the VCR channel (or AV
mode).
Slide the TV/VCR/DVD switch to the right.
You can lock the disc tray to prohibit the unwanted disc ejection
by children.
A
Lock the disc tray.
While the unit is turned off, press and hold STOP (8),
then press OPEN/CLOSE (x) on the unit. "Loc" appears
on the front display panel and the disc tray is locked.
B
Unlock the tray.
While the unit is turned off, press and hold STOP (8),
then press OPEN/CLOSE (x) on the unit. "UnLoc"
appears on the display panel.
* The default setting is bold in the table below.
81
EN