Jenn-Air CCG2420 Use And Care Manual page 9

Check the followinglist to be sure a service call is really necessary.
If surface burner fails to light:
• checkto be sure unit is properlyconnectedto powersupply.
• checkfor a blowncircuitfuse or a tripped main circuit breaker.
• checkto be sure burneris correctlyrated for yourtype of gas,
• checkto be sure burner ports or ignitionporteare not clogged.
• checkto be sure igniteris clicking. If igniterdoesn'tclick,turn controlknobOFF.
• check to be sure the burnerhead is correctlyseated on the burnerbase,
If the flame is uneven:
• burner ports may be clogged.
• flame setting may need to be adjusted.
If surface burner flame lifts off the ports:
• contactan authorizedJenn-Air Service Contractor.
If surface burner flame is yellow in color:
• contactan authorizedJenn-AIr Service Contractor.
9