Advertisement
The surface burner heads are removablefor cleaning. The
caps are porcelain, while the port areas are aluminum.
Wash the surface burner heads in the sink with mild
detergent and a plasticscrubber.
When replacingthe burner heads, carefully align the detent
on the head with the indentation in the burner base.
Note: Check to be sure all ports are open. To open clogged ports, insert a toothpick
directly into each port.
Note: When burner heads are removed for cleaning, be careful not to spill liquids
through the hole in the burner bases.
If the igniters get dirty or greasy, clean with a toothbrush and warm soapy water. Rinse
and dry thoroughly. DO NOT STRIKE or PRY the ceramic igniter.
The tempered glass cooktop will withstand temperature changes while cooking.
A/thoughimpact resistant,treat this g/ass cooktop with the same care you would any
glass material.
Clean glass cooktop after surface has cooled. Wipe with a clean, damp sponge or cloth.
Rinse and dry thoroughly to prevent a filmy residue. A glass cleaner may be used to
remove smudge marks and stains.
The knobs on the control panel can be removed with the controls in the OFF position.
Pull each knob straight from the shaft. Wash knobs in warm soapy water or dishwasher;
do not use abrasive cleansers or materials. To replace each knob, match flat par_of
knob openingwith the flat on the shaft, returning in OFF position.
Important: Neveruse a metalbladeto pry knob off. If knobcannotbe easily removed,
tuckthefolds ofa clothdishtowelunderthe knoband pull the towelupwardwithsteady,
even pressure.
Important: Be careful to replacethe knobswith gentle pressure. Never hit the knob
on the shaft with your hand or any other object.
Note: When knobsare removedfor cleaning,be carefulnottospillliquidsthrough holes
in the controlarea.
11
Advertisement
