1.5 PANEL MOUNTING [1]
1.5.1 INSERT THE INSTRUMENT
1 Prepare panel cut-out
2 Check front panel gasket posi-
tion
3 Insert the instrument through
the cut-out
3
2
UL note
[1] For Use on a Flat Surface of
a Type 2 and Type 3 'raintight'
Enclosure.
1.5.2 INSTALLATION SECURING
1 Fit the mounting clamps
2 Push the mounting clamps
towards the panel surface to
secure the instrument
1
1
1
1.5.4 INSTRUMENT UNPLUGGING
1 Push and
2 pull to remove the instrument
Electrostatic discharges can dam-
age the instrument
Before removing the instrument the
1MΩ
1.5.3 CLAMPS REMOVING
1 Insert the screwdriver in the clips
of the clamps
2 Rotate the screwdriver
2
operator
must
2
discharge himself
to ground
1 - Installation
2
1
B
1
1
1
7