Parameter Setting; Numeric Entry - ascon M3 Series User Manual

4 - Operations

4.3 PARAMETER SETTING

22

4.3.1 NUMERIC ENTRY

(i.e. the modification of the Setpoint value from 275.0 to 240.0 )
$ %
Press or momentari-
ly to change the value of 1 unit
every push
$
Continued pressing of
%
changes the value, at rate
that doubles every second.
Releasing the button the rate of
change decreases.
In any case the change of the value
stops when it has reached the
max/min limit set for the parameter.
In case of Setpoint modification:
$ %
press or once to dis-
play the local Setpoint instead of
working Setpoint.
To evidence this change the dis-
play flashes once. Then the
Setpoint can be modified
Operator
274. 8
mode
working Setpoint
275. 0
displayed
or
Local
274. 8
Setpoint display
275. 0
—Lower
Setpoint
274. 8
modification
230. 0
—Raise
274. 8
240. 0
after 2 sec.
Setpoint entry.
°C
The operation is
240. 0 acknowledged by
one flash of the
display.