Refrigerating Cycle Diagram - Samsung JH035EAV Series Service Manual

9-2 Refrigerating Cycle Diagram

Indoor Unit
Condenser
Gas refrigerant discharged from the compressor is cooled down in the condenser of the outdoor unit by means of thermal emission
and turned into a liquid refrigerant before being sent to the evaporator.
Compressor
It compresses the low-temperature, low-pressure refrigerant to let it flow to the Cycle.
Evaporator
As the liquid refrigerant that has been absorbed via capillary tubes evaporates (from liquid to gas), it absorbs heat from the surround-
ings, thereby cooling the indoor area.
Service Valve
Using a hex wrench, turn the needle valve counterclockwise to open the valve. It is used for vacuuming, gas drain, refrigerant
injection, refrigerant purge, and indoor-outdoor units connection.
Accumulator
It prevents liquid refrigerant from flowing into the compressor.
(If liquid refrigerant enters the compressor, it becomes overloaded)
Samsung Electronics
Outdoor Unit
Ø8 1 24
ROW STAGES
G-F 1.3
IN
Valve-4way
DB96-07154B
3/8"
EEV D14SH-3R
1/4"
851
L
Compressor
G4C090LUBER
Cond S/S
Air
9-2