Dockside.operation; Shore.power.connections; H.-.8. Dockside.operation - Four winns 318 VISTA Owner's Manual

Boats
Table of Contents

Advertisement

air.conditioning..The.dockside.system.uses.three-wire,.
color-coded.circuitry..The.black.or.hot.wire.is.the.
ungrounded.current.carrying.conductor..The.white..
or.neutral.wire.is.the.grounded.current.carrying.
conductor..The.green.wire,.referred.to.as.the."equip-
ment ground," is a grounded conductor, and under
normal.conditions.is.not.a.current.carrying.wire...
The.neutral.wires.are.connected.together.at.a.buss.
bar..The.equipment.grounds.are.similarly.connected.
together.at.another.buss.bar..
Each.hot.wire.is.connected.to,.and.protected.by,.a.
circuit.breaker.in.the.distribution.box.located.at.the.top.
section.of.the..
AC/DC cabin panel identified "120V AC SYSTEM".
The.standard.dockside.system.has.a.main.circuit.
breaker.which.protects.the.overall.distribution.network.. .
The.MAIN.dockside.inlets.are.located.in.the.aft.
transom.systems.locker..The.318.Vista
MAIN.circuit.breakers.on.the.AC/DC.cabin.panel...
The MAIN breakers must be turned "ON" and the boat
must.be.connected.either.to.shore.power.or.generator.
running.for.AC.system.operation..The.MAIN.circuit.
breakers.protects.both.the.hot.and.neutral.input.leads.. .
This.breaker.is.sensitive..The.resulting.power.surge.
which.occurs.when.connecting.the.shore.power.cord.
may.cause.the.MAIN.breakers.to.trip..To.avoid.this.
power.spike,.turn.off.the.MAIN.breakers.before.
plugging.in.the.shore.power.cord..Securely.connect.
the.power.inlet.of.the.boat.and.the.shore.power.
receptacle..Once.the.shore.power.is.securely..
connected,.turn.the.MAIN.breakers.back.on..If.the.
connection.is.broken.and.later.re-secured,.the.circuit.
breaker.may.trip..Connections.must.be.secure.for.
uninterrupted.dockside.service.
The.AC.voltage.for.the.generator,.or.shore.power..
AC.systems.1.or.2,.may.be.monitored.with.the.AC.
voltmeter.in.the.AC/DC.panel..Use.the.AC.source.
toggle.switch.to.monitor.the.voltage.of.the.system.
desired.
H - 8
DOCKSIDE OPERATION
If any abnormalities appear during dockside
operation, DISCONNECT the system immedi-
ately to prevent electric shock hazards! Have
the boat's electrical system and the shoreside
receptacles checked as soon as possible.
Electrical Systems - Section H
A. Shore Power Connections
To prevent electric shock hazards, use only
equipment with approved three wire electrical
plug connections. Be sure each item being
used has been tested and is free of electrical
shorts and ground faults.
Fifty.foot,.ten.gauge,.three-wire,.shore.power.cords.
are.provided.with.dockside.wiring..The.shore.power.
cords.on.60.Hertz.systems.have.30.amp.twistlock-
type connectors. They have a power "ON" indicator
light.to.ease.in.connecting.and.troubleshooting..This.
connector.complies.with.the.American.Boat.and.Yacht.
Council.(ABYC).standards.
.models.have.
®
Some.marinas.are.not.equipped.with.approved.
twistlock-type.receptacles..An.adaptor.is.available.
from.Four.Winns.which.converts.the.twist-lock.shore.
plug.to.a.three-wire.grounded.household.type.plug..
Use.only.an.approved.adaptor.when.an.adaptor.is.
necessary.
DO NOT use a two-wire adaptor to connect to
a three-wire system. These adaptors do not
provide adequate grounding.
Shore.power.connection.procedure.is.as.follows:
1.. Turn.off.the.boat's.main.breaker.switch.before.
connecting.or.disconnecting.the.shore.power.
cable.
2.. Connect.shore.power.cable.to.the.dockside.inlet.
receptacle of the boat first, then connect it to
dockside.shore.power.outlet.
Always connect the cord to the power inlet
receptacle of the boat before making connec-
tions to the shore power source.
3.. Check.for.reversed.polarity.on.the.AC.panel...
If.the.reversed.polarity.light.is.activated,.immedi-
ately.disconnect.the.shore.power.cord...
See.Section.H-8C.-.Reverse.Polarity.Indicator.
NOTICE
Owner's Manual Page 

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents