Four winns 318 VISTA Owner's Manual page 148

NOTICE
Canvas should be snug. If too taut or extremely
tight, canvas could tear or pull at seams.
flexarail
awning
Figure O-3: Bimini Top Installation
Installing.valances:
1). Valances.-.small.areas.of.canvas.curtain.-are.use.
to.attach.larger.canvas.pieces.to.the.vessel..There.
are.valances.for.the.bimini.side.curtains,.camper.
top.and.camper.side.curtains..See.Figure.O-4.
2). The.bimini.side.curtain.valance.attaches.with.the.
velcro.facing.out.
3). The.camper.top.valance.attaches.with.the.velcro.
facing.in.
4). The.camper.side.curtain.attaches.with.the.velcro.
facing.out.
Weather Covers - Section O
ball & socket
mount
Bimini
top
pull-pin
front adjustable
support pole
zippered valance
in flexarail awning
Figure O-4: Installing Valences
To.install.bimini.side.curtains.&.visor:
1). Install.the.bimini.top.and.bimini.side.curtain.
valance.(see.previous.installation.instructions).
2). Locate.the.center,.left.and.right.windshield.visors.
3). Attach.the.center.visor.piece.to.the.bimini.top,.then.
each.of.the.side.visors.-.zipping.each.piece.about.
3" until all the parts are in position. See Figure O-5.
4). Finish.zipping.all.the.visor.pieces.
5). Snap.to.the.top.of.the.windshield.(from.the.outside.
if.possible).
6). Locate.the.starboard.and.port.side.curtains.
7). Zip.each.partially.in.place.in.all.directions,.then.
complete.the.zipping.
8). Snap.to.the.boat.(from.the.outside.if.possible).
9). Secure.and.smooth.all.velcro.closures.
Owner's Manual Page