Renault 2000 Megane Technical Note page 22

– the earth strap on the bulkhead,
– the mountings of the air conditioning hoses (if
fitted) on the compressor and the condenser.
NOTE: it is essential to insert plugs in the pipes and on
the compressor to prevent the moisture entering the
circuit.
Remove the upper radiator mountings and attach the
cooling system to the engine.
Fit the engine retaining tool Mot. 1453 ensuring that
the strap is correctly positioned.
Remove the suspended engine mounting cover.
ENGINE AND PERIPHERALS
Engine and transmission assembly
13932R
17518R1
Insert a wooden block between the gearbox and the
sub-frame.
Remove the nut (1), then tap it with a copper hammer
to release the suspended engine mounting stud.
Fit tool Mot. 1159 as shown below.
10-6
10
17518R2
99024R2