Engine And Transmission Assembly - Renault 2000 Megane Technical Note

TIGHTENING TORQUES (n daN.m)
Sub-frame front mounting bolts
Sub-frame rear mounting bolts
Mounting bolt for front right suspended
mounting cover to engine
Movement limiter mounting bolt
Mounting nut for rubber engine mounting
pad on front left-hand side member support
Shock absorber base bolts
Brake caliper mounting bolt
Steering shaft yoke mounting bolt
Sub-frame - side member tie rod bolts
Wheel bolts
ENGINE AND PERIPHERALS

Engine and transmission assembly

Engine and transmission assembly
SPECIAL TOOLING REQUIRED
Mot. 1040-01 Dummy sub-frame for removing
and refitting engine and
transmission assembly
Mot. 1159 Tool for maintaining engine on
subframe
Mot. 1202-01
Hose clip pliers
Mot. 1202-02
Mot. 1233-01 Threaded rods for lowering the
sub-frame
Mot. 1294-01 Tool for removing windscreen
wiper arms
Mot. 1448 Long nose pliers for hose clips
Mot. 1453 Engine support tool
6.2
10.5
6.2
6.2
6.2
18
4
3
3
9
REMOVAL
Put the vehicle on a two post lift.
During this operation, it is necessary to secure the
vehicle to the lift using a strap to prevent the vehicle
from losing balance.
See Technical Note 2988A for the procedure for fitting
the strap.
10-3
10
14893S