Using Preset Tuning; Selecting The Fm Reception Mode - JVC TH-A5R Instructions Manual

Using Preset Tuning

Once a station is assigned to a channel number, the station can be
quickly tuned. You can preset up to 20 FM and 10 AM stations.
To store the preset stations
From the remote control ONLY:
1
Tune in the station you want to preset (see
"Tuning in Stations").
2
Press PROGRAM.
The preset number appears on the display and the
PROGRAM indicator lights up.
Preset number
3
Press TUNER PRESET UP or DOWN to select a
preset number.
4
Press PROGRAM to store the preset
station.
The PROGRAM indicator goes off, and the station is
assigned to the selected preset number.
5
Repeat steps 1 to 4 until you store all the stations
you want.
To erase a stored preset station
Storing a new station on a used number erases the previously stored
one.
PROGRAM
TUNER PRESET
DOWN
REW
PROGRAM
To tune in a preset station
From the remote control:
1
Press FM/AM repeatedly
to select the band.
The last received station of the
selected band is tuned in.
• Each time you press the button, the band alternates between
FM and AM.
2
Press TUNER PRESET UP or DOWN until the
desired preset station
appears on the
display.
• TUNER PRESET UP
• TUNER PRESET DOWN : Decreases the preset number.
On the front panel:
1
Press SOURCE repeatedly until the
desired band appears on the display.
2
Press 7 so that "PRESET" appears on the
display.
• Each time you press the button, the operation mode of
UP
¢ and 4 buttons alternates between "PRESET" and
"MANUAL."
FF
PRESET : Select this for using ¢ and 4 as the
buttons to select the preset station.
MANUAL : Select this for using ¢ and 4 as the
buttons to change the frequency manually.
3
Press ¢ or 4 repeatedly until
the desired preset station appears
on the display.
• ¢ : Increases the preset number.
• 4 : Decreases the preset number.

Selecting the FM Reception Mode

When an stereo FM program tuned currently is noisy, you can
change the FM reception mode to improve the reception.
Press AUDIO/FM MODE.
The indicator goes off from the display and the
program loses the stereo effect.
To resume the stereo effect, press AUDIO/FM MODE again.
The stereo effect resumes.
Note:
The FM reception mode will also resumes in the following cases:
• When you change the frequency, the preset number, or the band
• When you change the source
• When you turn off the system
DVD FM/AM AUX MUTE
TUNER PRESET
DOWN
REW
: Increases the preset number.
SOURCE
AUDIO/
FM MODE
UP
FF
45