Windsor iExtract 26 Duo Operating Instructions Manual page 19

Operations
B2-Deep Extraction-Fast
This mode is used for deep carpet extraction. In this mode the machine will propel at fast speed. The brush
deck will automatically lower to contact the floor. The vacuum shoes will automatically lower to the floor and
the vacuum motors will turn on. The water will flow at a high rate. Water will automatically shut off in neutral
and resume as machine propels forward. The vacuum shoes will lift off the floor in reverse with the vacuum
motors having a delayed shut off to clear the hoses.
C-Vacuum Only Mode
This mode is used for solution recovery. In this mode the machine will propel at fast speed. The brush deck
will be up and the motor off. There will be no solution flow in this mode. The vacuum shoes will automatically
lower to the floor and the vacuum motors will turn on. The vacuum shoes will lift off the floor in reverse with the
vacuum motors having a delayed shut off to clear the hoses.
C-Off-Aisle Tool Mode (Wand/Hand Tool)
This mode is used for Off-Aisle tool use. The dial is set in the same position as the Vacuum Only Mode. Once
the Off-Aisle tool button on the lower control panel is pushed, the machine will not propel. The vacuum motors
and pump will come on and solution will flow.
D-Brush Only Mode
This mode is used for carpet agitation. In this mode the machine will propel at fast speed. The brush deck will
automatically lower to contact the floor. There will be no solution flow in this mode. The vacuum shoes will
remain off the floor and the vacuum motors will be off in this mode.
2. Solution Button and Indicator
The button enables and disables solution flow. When the green indicator is illuminated, solution flow is
enabled.
86372820 Chariot 3 iExtract 26 Duo 19