Cleaning Clogged Milk Pipework - Miele CVA 6805 Operating And Installation Instructions

Cleaning clogged milk pipework

If the quality of the milk froth is
unsatisfactory, the air intake hose may
be clogged. Follow the instructions in
"Step 2: Cleaning the air intake hose
and angled section in the door."
If no milk comes out of the main
dispenser, only steam, please follow
the instructions in Steps 1 to 3.
First check if the milk in the milk
container has spoiled. This can clog
the milk pipework.
To clean the clogged milk pipework,
take a step-by-step approach.
Afterwards, check if the preparation
and quality of the milk and/or milk froth
are satisfactory.
If the preparation and quality of the milk
and/or milk froth are still not
satisfactory, do not make any drinks
and repeat the steps described.
74
Step 1: Cleaning the milk
pipework in the lid of the milk
container
^ Pull the milk intake pipe a out of the
milk container lid.
Make sure you also remove the seal
b.
^ Clean both under running water.
Insert the supplied cleaning brush
into the stainless steel pipe and move
it back and forth until all milk residue
has been removed.
^ Use the cleaning brush to clean the
milk pipework in the lid as well.